Results 1 to 8 of 8
Threaded View
-
11-21-2020, 07:55 AM #3
- Join Date
- Nov 2020
- Posts
- 22
I think I'm possibly too much of a noob to go rebuilding the printer to add levelling sensors. I'll need to get a bit more confident before I venture into that.
As far as I can see there is no native z-offset setting on the Mega S. Should I level the plate using a very precise thickness of paper, or is there a command I can instert into the g-code file to execute the z-offset for each print?
This was another useful vid I hunted down just now: https://youtu.be/6QhUgq4C008
Many thanks for the guidance.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help