Results 1 to 2 of 2
Threaded View
-
11-19-2020, 05:04 PM #2
- Join Date
- May 2018
- Posts
- 566
it is all relative to the machine, nozzle and the material.. it is a science experiment. There is a setting for filament diameter which should be measured and average actual size input to the slicer.. I have a very different machine than you do, most filaments need 92-93 with mine.. so do what works best for you. I think in one slicer the default filament size is not 1.75 so you may want to make sure that is set right.. good luck
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help