I'm using 1.75 mm PLA fillament(Was in printer box) with 0.2 mm nozzle on 0.1mm layer height. On creality slicer it was set, that fillament is 1,75, sill dencity 25%, 0.8 bottom/top/shell, 150 flow and brim platform.
h21Po99xWC0.jpgUj7Bt8-ALBM.jpg
First image is what got for models with 100% fill, 25 speed and 160 flow
Now i decided to print default cat, which was on sd card, as u can see, bottom part was printed at 100 flow, then i changed it ti 150 and top part seems okay for now.