Results 1 to 10 of 17
Hybrid View
-
11-24-2020, 06:04 PM #1
- Join Date
- Nov 2020
- Posts
- 9
There are links to both cubes and cat gcodes.
Can u pls say why there are gaps between walls on all sliced models and why there is no such problem on cat?
https://wdfiles.ru/jv1x
https://wdfiles.ru/jv1y
https://wdfiles.ru/jv1z
-
11-24-2020, 08:17 PM #2
After printing the Calibration cubes, I do not know where these G-Code came from though they printed in excellent condition.
If you sliced them with Pruseslicer post your 3MF file will look at your settings.Last edited by Roberts_Clif; 11-25-2020 at 08:19 AM.
-
11-25-2020, 06:36 PM #3
- Join Date
- Nov 2020
- Posts
- 9
Cubes were sliced with cura nd prusa slicers, i didnt get 3mf that time, but i recreated that project:
https://wdfiles.ru/fj3K
I see all my files have underextrusion which i can fic and wall gap problems.
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials