Help me with my first printer ender 5, i'm ready to give up

[Roberts_Clif]

Hello Kapitan:

I will start with my opinion, it looks like you are using 1.75mm filament with the slicer set for 3mm filament.
This appears to be under extruded, on your 2nd post could not see the attachment.

Could we get some more information, What slicer are you using, the setting of your slicer what filament you are trying to 3D Print.
The measurements of your printed XYZ cube ect...

[Kapitan]

I'm using 1.75 mm PLA fillament(Was in printer box) with 0.2 mm nozzle on 0.1mm layer height. On creality slicer it was set, that fillament is 1,75, sill dencity 25%, 0.8 bottom/top/shell, 150 flow and brim platform.
h21Po99xWC0.jpgUj7Bt8-ALBM.jpg
First image is what got for models with 100% fill, 25 speed and 160 flow
Now i decided to print default cat, which was on sd card, as u can see, bottom part was printed at 100 flow, then i changed it ti 150 and top part seems okay for now.