Results 1 to 7 of 7
Hybrid View
-
11-12-2020, 07:53 AM #1
you re calibrated way too close to the printbed.
cura is not good and certainly not easy to use or adjust.
try pdownloading prusaslicer.
https://www.prusa3d.com/prusaslicer/
Also unless you change the bed levelling nuts for locking nuts - bed calibration tends to be a constantly ongoing thing with i3's .
-
11-12-2020, 08:50 AM #2
- Join Date
- Nov 2020
- Posts
- 22
Thanks for the advice.
I have swapped over to Prusaslicer now. The first layer is still not great, but it may be, as you say, due the constant atteniton the bed-level needs. I haven't been checking that.
On the whole though, de-splodging notwithstanding, the 3D printing experience is a fulfilling one
Many thanks.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials