Results 1 to 10 of 12
Thread: 3D Printing of Small Bracket
Hybrid View
-
11-05-2020, 03:33 AM #1
- Join Date
- Nov 2020
- Location
- Oxford, UK
- Posts
- 12
Well, I've only been interested in this for a few days, but the Markforged One is a single filament printer and Onyx can be printed on its own:
>It can be printed alone or reinforced with one of our continuous fibers to give strength comparable to aluminum. Use Onyx for anything from tooling and fixtures to end-use parts.
And the main pic here only has a single spool holder - https://markforged.com/3d-printers/onyx-one
And wasn't aware that there were other carbon reinforced filaments. Live and learn!!
That is what I thought - a reasonable price compared with almost double for ABS. And the print job was done overnight 8+ hours.
HDMI hub - small beer really compared to a Sony 590ES 4K lamp projector!! Sony has a strange HDMI wiring setup, so a normal switcher gets confused and doesn't work. Just changed from 2001 InFocus X1 800x600 to Sony 4K. Quarantine and lockdown toys!!
OK - thanks, I'll pass on the message.
I might have another job for a boom gooseneck nylon swivel block. The black bit in the attached picture. It will be slightly larger than this one, which is for a Mirror sailing dingy with mast/boom diameters of around 50mm. My mast/boom will be 83 and 63mm diameter, so I'm estimating that the block will be around 40mm x 38mm x 55-60mm But haven't finished designing it. Couple of 10.5 or 12.5mm holes for the bolts/fixings.
gooseneck block.jpg
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials