Results 1 to 4 of 4
-
10-29-2020, 03:49 AM #1
- Join Date
- Oct 2020
- Posts
- 1
Need to find 3D printer with clay (paste/ceramics) extruder for research..
Hi guys! I need to buy relatively cheap 3D printer with clay (paste/ceramics) extruder for research (printing of porous fillers for chemical reactors).
I would be very greatful, if somebody suggested a manufacturer/model (because the cheapest example I found - ZMorph 2.6k euro) The budget of project is very limited (about 2k euro).
-
10-29-2020, 09:02 AM #2
get a decent printer and make your own paste extruder
This one is designed to fit a prusa - also a good machine to get.
lol you can tll it's an old video by the stepper motor sounds :-) My old creator sounds like that.
https://www.thingiverse.com/thing:20733Last edited by curious aardvark; 10-29-2020 at 09:11 AM.
-
10-29-2020, 09:07 AM #3
https://www.sciencedirect.com/scienc...68067217300822
have a read through that as well. :-)
-
11-01-2020, 01:43 PM #4
- Join Date
- Oct 2020
- Posts
- 1
Hi guys! I need to buy relatively cheap 3D printer with clay (paste/ceramics) extruder for research (printing of porous fillers for chemical reactors).
I would be very greatful, if somebody suggested a manufacturer/model from https://essaydragon.com/blog/descriptive-essay-writing (because the cheapest example I found - ZMorph 2.6k euro) The budget of project is very limited (about 2k euro).Last edited by sarahk99; 11-08-2020 at 06:01 PM.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery