Results 31 to 36 of 36
Thread: i need help badly
Hybrid View
-
11-04-2020, 06:19 AM #1
Nozzles have to be replaced once in a while they are in the list of consumables, though you may need increase the hot-end temperature for your filament.
Do you hear clicking, this could be a sign of the filament slipping causing under extrusion.
-
11-04-2020, 03:20 PM #2
- Join Date
- Aug 2020
- Posts
- 29
So I just bought a new heat box which came with a new hot end and nozzle and I do not hear any clicking I noticed this when I was doing the temp tower I could not do it as the filament did not come out fast enough
-
11-10-2020, 05:18 PM #3
- Join Date
- Aug 2020
- Posts
- 29
Are yopu still able to help me??????
-
11-10-2020, 06:44 PM #4
Yes.
Print something small and post an image. Or post a photo of your temp tower
post your slicer name and slicer settings.
Nozzle size, Layer Height, Hot-end Temp, Bed Temp, Print speed nozzle height above the bed at 1st layer.
Please note the actual hotend temperature during printing, do you have a parts cooling fan running and at what speed.
-
11-11-2020, 08:33 PM #5
- Join Date
- Aug 2020
- Posts
- 29
my fan i have turned off and i use cura as my slicer and i have a .4 nozzle size i will run my temp tower tommrow
-
11-13-2020, 08:02 PM #6
- Join Date
- Aug 2020
- Posts
- 29
i have found some people at school that are going to fix but thanks so much for all your help i have learned alot from you Thxs!!!
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials