Results 1 to 6 of 6
Hybrid View
-
10-19-2020, 10:37 AM #1
you say you tested the supply 'wires' - did you test the pins in the actual socket or just the wires ?
Broken wires are really common- had a few over the years - dead fan sockets - not so much.
There may also be a second fan socket. no clue what board creality went with for the ender 3 v2.
-
10-19-2020, 12:18 PM #2
- Join Date
- Sep 2020
- Posts
- 4
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion