Results 1 to 6 of 6
Threaded View
-
10-11-2020, 12:03 PM #3
sounds like you need to do the ptfe tubing mod.
just about the first thing I did with both my rep clones was to take the extruder apart and insert shoirt lengths of p[tfe tubing between the input ands gears and the output and the hot end feed.
The filament is probebly just not lining up on the gear feed.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials