Results 1 to 4 of 4
Thread: Unsmooth, harsh resolution
Threaded View
-
10-07-2020, 01:08 PM #3
- Join Date
- Oct 2020
- Posts
- 2
I am using Creality CR10S.
The filament is SAKATA. I printed it at 220 Celsius.
Today i printed again at 210 Celsius with no noticeable differences.
I experimented with a flow rate of 100% and 105%. No big differences.
Actually, if you look at the sliced previw by Cura, it looks almost like the print (not smooth as it should). Is it an error from the slicer/
Please explain to me how to...
Today, 12:15 PM in 3D Printer Parts, Filament & Materials