Results 1 to 2 of 2
Threaded View
-
09-14-2020, 08:25 AM #2
Do the configuration files have you changes in them.
I discovered no changes to the firmware. The code in the lines below need your 3D Printers information in order to work.
Code:#define X_BED_SIZE change_value // This is how big your bed is, in the X direction. Replace change_value with the actual value #define Y_BED_SIZE change_value // This is how big your bed is, in the Y direction. Replace change_value with the actual value #define x_steps change_value //This defines the number of steps your X motor requires #define y_steps change_value //This defines the number of steps your X motor requires #define z_steps change_value //This defines the number of steps your X motor requires
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials