Results 1 to 10 of 33
Hybrid View
-
09-10-2020, 10:51 AM #1
is that two pyramids - base to base, attached to another base to base pyramid ?
basically two of these, stuck together along one of the faces ?
Also dimensions are determined by the slicer before you print. You can make them anything you like :-)
Size of a model like this within a cad program is largely irrelevant.
More pictures wouild be useful - not entirely sure of the shape.
Is this close ?
Last edited by curious aardvark; 09-10-2020 at 11:21 AM.
-
09-10-2020, 11:30 AM #2
lol - geometry was never my strong suite.
so you've got a square base with 8 triangles vertically mirrored to another 8 triangles and a square top ?
Ah - do you perchance know the actual angles of those triangles ?
That would probably help.
Actually what I need is the width of the base of the trinagles and the height of the triangle from the centre line to the apex.
That'll give me a proportionally corrext sized triangle. Which I can then rotate and tilt to make the actual shape.
In theory anyway :-)Last edited by curious aardvark; 09-10-2020 at 11:37 AM.
-
09-10-2020, 11:36 AM #3
- Join Date
- Sep 2020
- Posts
- 15
I don’t know the actual degree of those angles but I can try to figure that out.
-
09-10-2020, 11:41 AM #4
- Join Date
- Sep 2020
- Posts
- 15
So the base is a 3” x 3” square, and it is 6” tall. So I think all those angles should be an even 60 degrees?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion