Results 1 to 3 of 3
-
08-30-2020, 03:12 PM #1
- Join Date
- Aug 2020
- Posts
- 4
Help problems printing on Ender 3
hi im having problems printing with my ender 3 could someone help me ?https://www.youtube.com/watch?v=p5oSOnI2OjEits like if the PLA didnt sit in the bed i dont really know why but it goes out of control
-
08-31-2020, 03:42 AM #2
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
It looks as if you have the nozzle to far from the bed! have you levelled the bed! there will be endless you tube videos showing you how to do this. You want to use a thi piece of paper too. Check my spacing with feeler gauges and the nozzle should be between 0.05 and 0.08 mm above the bed I have found.
-
08-31-2020, 05:27 AM #3
- Join Date
- Aug 2020
- Posts
- 4
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help