Results 1 to 1 of 1
Thread: Setting Z Axis End Stop
-
09-04-2020, 12:31 PM #1
- Join Date
- Nov 2019
- Posts
- 1
Setting Z Axis End Stop
Hi every1
This question is probably asked several times.
How do you set the Z axis end stop ? Do you guys put the nozzle tip on the printing surface and set the Z axis end stop or do you slide a feeler gauge of 0.2mm under the tip and set the end stop there ?
Thank you for the help !
Alex
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery