Results 1 to 10 of 11
Thread: Printed box leaks
Hybrid View
-
09-06-2020, 07:51 AM #1
Simplify3d has always done this - well from version 2 onwards anway.
this is 100% infill:
And this is with solid diaphragm every 1 layer ticked:
These settings for both - just 'solid diaphragm NOT ticked for the first image.
Are you perhaps getting infill mixed up with layers and shells ?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion