[CR-10 V1 + BLTouch] Print bed not moving during print?

[McStebb]

EDIT: SOLVED!

I fixed it! I rolled it back to Marlin 1.1.6 and that did the trick. I used the 'official' Marlin+BLTouch build from the Creality website.

Hello,

I need some help, and this message board looked like a good place to turn to.

To make a long story short, I recently upgraded my workplace's stock Creality CR-10 V1 with a BLTouch V3.1 ABL.
I flashed Marlin 1.1.9, downloaded from the official Creality website.

I'm now having this problem whenever I try to print a gcode file...

1. The printer homes normally without issues, even doing the BLTouch 'safe home' at the center of the bed.
2. The printer performs the 9-point ABL procedure without issues.
3. The printer returns to Y0 X0 and preheats the nozzle.
4. When the nozzle is finished heating, and printing is supposed to start, the printer begins extruding filament in one spot without moving any axis.

Here's a video of the issue: https://youtu.be/GNv9I4lEuuc

Here's what I've tried already, with no success:

• Tried power cycling the printer and trying the file again.
• Tried slicing a different GCode file, with a different model, and even slightly different print settings.
• Changed the start Gcode
• Tried printing without doing the ABL routine.

Anyone have any ideas? Thanks in advance.