Results 1 to 10 of 37
Thread: Looking for large 3D printer
Threaded View
-
08-30-2020, 04:03 PM #8
- Join Date
- Jan 2016
- Posts
- 326
I found the problem and fixed it. On the X-Axis gantry, there is a screw that is under the linear rail. I think that they put the screw in the wrong hole so that the switch doesn't hit the screw and the machine makes grinding noise. The screw should be in the hole closer to the edge of the gantry. After putting the screw in the correct hole, I can level the build platform.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help