Results 1 to 10 of 33
Threaded View
-
08-24-2020, 12:01 PM #15
Okay - she lives !
Properly - or as much as will be for now :-)
I changed the firmware to a custom version a guy made.
Looks nice, has one button load and remove for the filament - which I like.
Fixed the temperature issues - done a couple pid's and updated and saved to eeprom viz g-code and the simplify3d control panel.
Added a micro sd - full size adaptor and prints are now working from the sdcard.
So it's properly functional.
Dimensional accuracy is excellent.
Did a 25mm cube at 150mm/s - great :-)
So I'm currently doing a more comples print. A print in place folding phone stand.
It's 2mm thick and has 6 hinges. Great bit of design.
not as tricky as an iris box, but still a good test print.
My only decision mow is whether to change the 0.4 nozzle for a 0.5.
And grease the z rods - it's developed a 'squeak' lol.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials