Results 1 to 10 of 50
Hybrid View
-
09-14-2020, 09:52 AM #1
what do you consider to be 'regular' speeds ?
Mine are 75mm/s for fine prin5ting, 100mm's standard prints and 150mm/s for rough but structural.
Only if I'm using flexible filaments do i drop down to 20-30mm/s.
That said I haven't done much with pet-g yet.
I think for something like a mumu I'd probably accept 50mm/s - anything much lower than that and even small multi material prints are going to take an enormously long time.
-
09-14-2020, 03:29 PM #2
- Join Date
- Oct 2016
- Posts
- 184
50mm/s is what I use mostly. Default Prusa profiles use 60mm/s for inner perimeters, 15mm/s for outer. I haven't really felt the need to bump up the speeds, although I think there's some room for every machine I have. PrusaSlicer has some 100mm/s profiles, might try them some time to see if the speedup is worth it.
PETG might have some limitations about speed, if I recall correctly I read somewhere that it might even fail to print properly after certain speed. I have printed some at 60mm/s as PrusaSlicer slices it and it turned out fine.
Please explain to me how to...
Yesterday, 12:15 PM in 3D Printer Parts, Filament & Materials