Results 1 to 3 of 3
Hybrid View
-
08-05-2020, 07:41 PM #1
- Join Date
- Jul 2020
- Posts
- 2
I contacted Flash Forge via e-mail, and Tang suggested replacing the stepper motor cable. He was correct - after replacing the cable, I found a small break on one of the leads coming out of the connector that plugs into the motor. I'm glad he suggested this, as i was going to replace the main board. Saved me $$.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help