Results 1 to 8 of 8
Thread: Wood filament
Threaded View
-
07-20-2020, 08:03 AM #2
as I've never had regular pla warp in the uk sun - no idea.
But the good stuff (colorfabb) has almost zero shrinkage during printing and will happily print on a cold bed.
But as it's just wood dust mixed with pla - so the thermo behaviour can be taken to be the almost identical to pla.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion