Results 1 to 3 of 3
Thread: Ender 3 Fan problem
-
07-11-2020, 08:51 AM #1
- Join Date
- Jul 2020
- Posts
- 14
Ender 3 Fan problem
I checked inside this fan , nothing there , clean ..
VIDEO
https://streamable.com/z32bpi
&
https://streamable.com/677uqu
Please help
Sometime it starts when it touches end switch and sometime when i start the printerLast edited by DavaX; 07-11-2020 at 09:48 AM.
-
07-15-2020, 01:39 PM #2
- Join Date
- Jul 2020
- Posts
- 11
Make sure connection is secure on the mainboard and fan. After that try reflashing the firmware. It should be running non stop when the printer is on.
-
07-16-2020, 01:00 AM #3
- Join Date
- Jul 2020
- Posts
- 14
Thank You i try
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery