Results 1 to 2 of 2
Threaded View
-
06-20-2020, 05:31 PM #2
you need to set the first layer to print thicker than the rest.
And 20mm/s for a first layer is way too fast for pla let alone abs. set it to somewhere between 5 and 10 mm/s
In my clip I was printing pla - and that's fast for a first layer. But I have a reallly 'sticky' print surface.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials