Results 1 to 8 of 8
Hybrid View
-
06-06-2020, 03:57 PM #1
- Join Date
- Jun 2014
- Posts
- 887
I've been purchasing my filament from MatterHackers for a few years and have had consistently good results with the economy category. I'm not sure why I'd want to buy the Pro stuff, as the non-Pro pricing is great and the shipping in the USA is free.
If you buy MH filament and get poor results, consider that parameters usually are different from one brand to the next. Your locally purchased stuff may require these adjustments, but your description of the failure is too vague to determine an answer.
-
06-06-2020, 04:41 PM #2
- Join Date
- Jun 2020
- Posts
- 2
I am not in the US so I need something that is available on Amazon.My current filament starts stringing as soon as the printer moves. The print doesn't stick to the bed (tried different temperatures starting with the 40 deg printed on the box). I am only able to print a perfect raft or brim (after slowing the speed), then once it goes to the actual print itself after the first layer the print will pop off the plate. Tried glue even though my printer is brand new and shouldn't need, but that didn't help. Different temperature will make the edges start coming off and eventually the whole thing becomes loose. I don't have this issue with the filament that came with it.
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help