I am not in the US so I need something that is available on Amazon.My current filament starts stringing as soon as the printer moves. The print doesn't stick to the bed (tried different temperatures starting with the 40 deg printed on the box). I am only able to print a perfect raft or brim (after slowing the speed), then once it goes to the actual print itself after the first layer the print will pop off the plate. Tried glue even though my printer is brand new and shouldn't need, but that didn't help. Different temperature will make the edges start coming off and eventually the whole thing becomes loose. I don't have this issue with the filament that came with it.