Results 1 to 8 of 8
Threaded View
-
05-30-2020, 07:07 AM #5
- Join Date
- May 2018
- Posts
- 564
I keep my enclosure at 50C as my electronics are inside and that seems to work fine for me. Bed temp at 110C and print at 235C. I mostly print parts that need to be mechanically sound so I normally use the highest safe layer height rather than going for high resolution or layer linens.. So if you you have a .4mm nozzle try a .3mm layer if you are using something thinner and having issues.
Last edited by airscapes; 05-30-2020 at 07:13 AM.
Please explain to me how to...
05-17-2024, 12:15 PM in 3D Printer Parts, Filament & Materials