Close



Results 1 to 2 of 2
  1. #1

    Tronxy X5SA-400 hitting frame

    I have just built the X5SA-400. During auto levelling and manual levelling it goes past the bed and hits the frame. I have double checked everything and cannot see why it is doing this.Any help would be appreciated. https://www.youtube.com/watch?v=qoiK...ature=youtu.beUpdate: The wrong firmware was installed from the factory. Firmware update resolved issue.
    Last edited by Tom9999; 05-23-2020 at 04:37 PM.

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    7,655
    One or more of your endstops is either in the wrong place, plugged into the wrong socket or possibly just faulty.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •