Bad prints from adhesion to filament missing

[Roberts_Clif]

Do not know much about Bukito 3D Printers.
Though I do know much of the 3D Printing problems can be attributed to the adjustments of the 3D Printer itself.

1..Belt tension needs to be periodically adjusted.
2. Slicer software configurations can make the world of difference from a good print to a great print.
3. Extruder gears, Hot-end heater, Parts Fan speed, spool tension feeding the extruder, ect.

Need your help to give me the basics of what you mean.
Is the bed wavy, is it tilted, does it have high and low spots. Please express to the best of your ability so I can get and ideal hot to help.

[sparkedmind]

I've included some screenshots of the Slicer settings. Imagine these settings can be different for different printers, but chances are you might notice something that is to low or high.
Printer settings_1.jpg Printer settings_2.jpg Printer settings_3.jpg

[sparkedmind]

Here are some screenshots from the Slicer setup also.

Slicer_!.jpg Slicer_2.jpg Slicer_3.jpg Slicer_4.jpg

Thanks for having offering to look through them. Be great if I can get this printer working at its best.