Results 1 to 3 of 3
Threaded View
-
04-11-2020, 05:10 PM #3
If you are using Marlin... You should consider turning on Z-BabyStepping and the Double Click option to jump to it.
When your printer is drawing the skirt around the part on the first layer, you can use Z-BabyStepping to slightly raise or lower the nozzle to get the perfect amount of 'squish' on the filament.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help