Results 1 to 3 of 3
Hybrid View
-
04-11-2020, 05:10 PM #1
If you are using Marlin... You should consider turning on Z-BabyStepping and the Double Click option to jump to it.
When your printer is drawing the skirt around the part on the first layer, you can use Z-BabyStepping to slightly raise or lower the nozzle to get the perfect amount of 'squish' on the filament.
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials