Results 1 to 3 of 3
Thread: 3D printer buying advice
-
04-08-2020, 10:22 AM #1
- Join Date
- Apr 2020
- Posts
- 1
3D printer buying advice
I have a little experience using 3D printers, have 6 Makerbots (2 different models) that I use to print mainly anatomy-like items in our facility. The issue I am having is they cannot reliably print soft filament (ninjaflex TPU). In addition these printers overtime have not been printing consistently good prints with PLA. So I am seeking guidance on purchasing a very reliable printer that can do both TPU and PLA. From my research a direct extruder would probably be best, but if you have any other advice, I would appreciate it. I would need some small and some large printer volumes and price is not an issue. I want to be able to replicate organs/bones/other soft tissue structures to actual scale. Thank you!
-
04-11-2020, 06:22 AM #2
- Join Date
- Apr 2020
- Posts
- 1
Hello everybody! At first, I was afraid to play wolf run slot. But after the first time, I changed my mind because I made good money. Make your bank you too.
-
04-11-2020, 08:07 AM #3
- Join Date
- Jan 2020
- Location
- CANADA
- Posts
- 12
Hello my friend...
I don't recommend getting an expensive device like Stratasys J750 , but if you want its services I can help you.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery