Help fixing mirrored prints

[jds41979]

Yes it has that file type. That is where I go to try to tinker. I uploaded the code and shared the link. I also uploaded a picture of the printer to show where things are and the 0,0,0 when it homes.https://drive.google.com/drive/folde...dX?usp=sharing

[Roberts_Clif]

I Believe this line should be
#define X_HOME_DIR 1

[jds41979]

changed -1 to a 1 there and then it just moves away from the endstop for a split second and stops.
I tried tinkering with the X_MAX_ENDSTOP_INVERTING and X_MIN_ENDSTOP_INVERTING and that makes it move, but tries to keep going even when hitting the endstop.