Results 1 to 10 of 28
Hybrid View
-
03-06-2020, 08:05 AM #1
well the creality is a bowden - so not great for flexibles.
Also creality, so will have issues ;-)
Out of those 2 I'd go for the tronxy.
Also it's the simpler of the two to convert to an enclosed and heated build volume.
Abs is pretty pointless - nylon is doable without a heated build volume - as long as you use the RIGHT nylon.
But for stability, ease of enclosing and not being a creality - I'd got for the tronxy.
-
03-06-2020, 08:22 AM #2
Thanks for the input!
OK, that the Tronxy is simpler to convert is a plus, very good to know.
Yes, it was also my thought first I saw the Tronxy, that it's easy to enclose, compared with the Creality.
And, I've also read some good things about the CoreXY "system".
"Also creality, so will have issues"
Oh, I thought Creality stood for a reliable and "out of the box" good machine...
Well, some tweaking, adjusting and trial-and-error I have counted with in any case, but if I can avoid a machine with built-in issues, I will!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion