Results 1 to 3 of 3
Threaded View
-
03-01-2020, 11:08 AM #1
- Join Date
- Mar 2020
- Posts
- 2
Help with trying to print a larger minifigure from HoMM with Ender 3 (beginner)
So, basically, I recently started printing with my Ender 3. My first try was a HoMM3 castle, which seemed to be ok, only a little too fragile. Second attempt was a dragon from HoMM5, but due to problems with the Z axis (I fixed that after), it was basically full of overfill. What I am asking for is if someone can help me a little with the settings for my next print (infill was changed from 35 to 25 here):
Titan.jpg
Here's the project file, from Cura: http://www.mediafire.com/file/e2rc53...eDemo.3mf/file
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials