So, basically, I recently started printing with my Ender 3. My first try was a HoMM3 castle, which seemed to be ok, only a little too fragile. Second attempt was a dragon from HoMM5, but due to problems with the Z axis (I fixed that after), it was basically full of overfill. What I am asking for is if someone can help me a little with the settings for my next print (infill was changed from 35 to 25 here):
Titan.jpg
Here's the project file, from Cura: http://www.mediafire.com/file/e2rc53...eDemo.3mf/file