Results 1 to 10 of 10
Thread: Begginer, need advice
Hybrid View
-
02-15-2020, 04:15 AM #1
You can also try to reduce speed for the first layer. Most slicers have this options, so try to print the first layer at 25mm/s for example and the rest at 50mm/s. Also, if you have trouble getting smaller parts, you can try to print a huge rectangle outline (some 2 perimeters) to better see where the bed
Please explain to me how to...
Today, 11:51 AM in 3D Printer Parts, Filament & Materials