Results 1 to 10 of 10
Thread: Begginer, need advice
Hybrid View
-
02-14-2020, 03:31 PM #1
- Join Date
- Feb 2020
- Posts
- 5
i just recieved the glass plate for it as well. I will try some more printing after i level it here....hope it works.
-
02-15-2020, 04:15 AM #2
You can also try to reduce speed for the first layer. Most slicers have this options, so try to print the first layer at 25mm/s for example and the rest at 50mm/s. Also, if you have trouble getting smaller parts, you can try to print a huge rectangle outline (some 2 perimeters) to better see where the bed
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help