Results 1 to 1 of 1
-
01-26-2020, 10:46 AM #1
- Join Date
- Sep 2018
- Posts
- 1
Looking for help with printing issue Anycubic Chiron
When I first got this printer I only had issues with small details. Have since found out those issues were caused by z wobble and fixed that issue but now I am still having issues getting a benchy to come out really good. for the most part I am having issues with the bow of the ship as it looks like its just melted off, but I have tried reducing printing temp down as far as 190 and the print got more stringy than before and still had the same issue. I also attached a photo of the front window of the benchy as that overhang is also kinda bad but that might just be caused by the 90 degree overhang.
Benchy 1 is showing the overhang if anyone has some tips to try and clean that up a bit
Benchy 2 is the real issue I am having with the bow of the ship.
Settings I used on that print were:
200 degree print temp
60 degree bed temp
0.08mm layer height
60mm/s print speed
using Cura for splicing
If you need anymore info please let me know as I dont know what other info is important
Please explain to me how to...
05-13-2024, 03:08 PM in 3D Printer Parts, Filament & Materials