Results 1 to 9 of 9
Thread: Help please with 1.1.9
Hybrid View
-
01-17-2020, 06:14 PM #1
- Join Date
- Dec 2019
- Posts
- 10
Just tried to run a test print. Homed the Z axis to 0, then brought it down .1 at a time until it just grabed the paper, (at .3). Went into marlin and added a 0.03 offset, since I figured it is backwards like my last post stated. Probe heated, went through the 3 point auto level, then started the print at Z level .3 according to the lcd. No idea why it did with an offset of .3? Anyway still reading and trying to figure it out.
Last edited by hyoslvr; 01-17-2020 at 08:12 PM.
ABS Sticking to Build Plate
10-20-2024, 05:02 PM in 3D Printer Parts, Filament & Materials