I have decided I want to print these parts in translucent blue PETG. And that spool isn't scheduled to arrive until tomorrow. So for now I will just keep designing the parts. I also wish to do a similar thing with the displays as what I did with my Black Widow rework. It would be cool to have a similar look to my printers. Get my own style going. So I am mounting the displays down low and leaned back at 45 degrees. voltage display from the buck lm2596 step down converter on the left and tft32 touchscreen on the right. I am integrating the display mount and a 20mm tall brace for the lower Z rods into the same part. I still have to produce the design for the right side. Here is my design for the left..