Results 1 to 10 of 13
Thread: Converting Mesh to Solid
Hybrid View
-
12-14-2019, 10:48 AM #1
- Join Date
- Dec 2019
- Posts
- 5
Thanks Fred! I really appreciate all your effort. Unfortunately I still cant get that to work, the only parts that are solid when I import it is a few of the interior parts. I just need the exterior for a simple print. I will keep trying to see if I can get it to work.
Thanks!!
-
12-14-2019, 01:57 PM #2
- Join Date
- Jun 2014
- Posts
- 885
Can you use/edit the STL file I've attached?
If you're running into problems, maybe a screen shot or drawing to show your objective?
I won't give up if you don't.
-
12-17-2019, 12:41 AM #3
- Join Date
- Dec 2019
- Posts
- 5
OUTBACK.jpgSo whats happening when I import into inventor and try to convert to solid is it still wont recognize it as a a solid. If I just try to print as is theres to many interior details. Also where the contours are in the body panel its reading those as voids. I have attached a screen shot of how it looks in my slicer. Like I said above what im trying to acomplish is just the exterior with solid body, Id like to delete the wheel so it sit flat and I can print and snap them on separate. I just wish I had more time to learn how to us mesh features, and the mixer. I would imagine it cant be that difficult to make all the exterior one surface, and everything inside solid without the wheels.
Thanks so much for your help!Last edited by peysera; 12-17-2019 at 01:26 AM.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help