Results 1 to 3 of 3
Threaded View
-
12-07-2019, 07:19 AM #1
- Join Date
- Dec 2019
- Posts
- 2
Tevo Tarantula, how to make it better?
Hi! This is my first post here and I hope I will find a lot of information / ideas for my 3D print hobby...I have a TEVO TARANTULA 3D printer. i build it myself and for me the results so fare are OK-isch...It seems I have some recurring issues whenever I print.Measures I took: Leveling the bed as precise as possible with the paper method.Tightening the belts by printing a belt tighter.To me the axes look stable enough...I did not try different settings yet like temperature / speed / extruder settings...Would any of you have ant idea what the problem could be? * The angle of the print is not 90° but more and leaning to the backside of the print * The first layer is not as nice as the top layer and stopped sticking to the bed like it did before. (even some wrapping now and then) * It seems there is a bad layer in all my prints at like 0.5cm height...I added some pictures to make it more clear.Help and suggestions are much appreciated!RegardsDirk
Please explain to me how to...
Yesterday, 03:08 PM in 3D Printer Parts, Filament & Materials