Makerfarm Prusa 10" i3v Available!

[1stage]

Here's a detailed parts list (with links and costs) for the Makerfarm Prusa 8" to 8x12 upgrade I'm planning:

From Makerfarm.com:

• 8.4" x 12.6" Heat Bed, ADD THERMISTOR, ADD BED RELAY - US$55.50
  (http://www.makerfarm.com/index.php/p...-heat-bed.html)
• Replacement Y belt, GT2, 3' - US$7.50
  (http://www.makerfarm.com/index.php/h...-gt2-belt.html)
• High Temp Pre-Wired Thermistor Extension Cable - US$5.95
  (http://www.makerfarm.com/index.php/m...cable-137.html)
  
  • SUBTOTAL - US$68.95
  • TAX - $0 (Unless you're in UT)
  • SHIPPING ~ US$15.00
  • MAKERFARM GRAND TOTAL ~US$84.00

From Openbuildpartstore.com:

• Extruded Aluminum replacement Y rails, V-Slot 20 x 20mm, 1000mm - US$10.00
  (http://openbuildspartstore.com/v-slot-20-x-20mm/)
  
  • SUBTOTAL - US$10.00
  • TAX - $0 (Unless your in whatever state they're in)
  • SHIPPING ~US$11.00
  • OPEN BUILD PARTS STORE GRAND TOTAL ~US$21.00

From Amazon.com:

• 12v 30A DC Power Supply - US$25.66
  (http://amzn.com/B00ENFBXQS)
• 12"x12" Cork Tiles (4) for Heat Bed Underlay Replacement - US$12.99
  (http://amzn.com/B002M78G0K)
  
  • SUBTOTAL - US$38.65
  • TAX - US$3.58
  • SHIPPING ~US$0 (Both are Amazon Prime eligible)
  • AMAZON GRAND TOTAL ~US$42.23

Currently un-sourced parts:

• New laser-cut Y bed trolley platform ~US$15.00
  
  • 1/4" hardwood plywood, 4' x 8' sheet - US$30 / 24 @ 12" x 16" raw panels = US$1.25
  • Laser cutting ~ US$13.00
  
  
• New 8" x 12" piece of 1/8" tempered glass, ground edges ~ US$18.00
  
  • SUBTOTAL - US$33.00
  • TAX - US$3.05
  • SHIPPING - US$0 (will likely source locally)
  • UNSOURCED GRAND TOTAL ~US$36.00
    
    

PROJECT COST ESTIMATE, ~US$184.00