Good second printer for mid-range

[curious aardvark]

for that budget you can afford an idex printer with a large build volume.
I still like the trex: https://www.formbot3d.com/formbot-la...ize-p0018.html
Also why bother with abs ?
pla and petg are both better as fdm materials than abs, Then there is the plethora of upgraded pla's available.
If you go for the hi-temp hot end option (which I would recommend) you start bringing things like polycarbonate into the mix.

So the b2 option with hi temp hotend and upgraded heatbed would be my choice.
Don't bother with the laser - it's not got enough oomph to bother with.

http://ae01.alicdn.com/kf/HTB1AT1MRpXXXXaXaXXXq6xXFXXXt.jpg?size=130781&heig ht=300&width=960&hash=4176854a21d81215100907acb984 a57d