Ender 3 and leveling problem

[Roberts_Clif]

Give us an example of how large the gap difference is.

Myself I spit the difference as to make an average bottom layer thickness that I can live with.
And print dual top/bottom and wall thicknesses.

I have also tweaked my 3mm Aluminum Bed.
This made the bed flatter allowing my smaller offset to be within a decent working area.

I had been 3D Printing over 2 years with PLA and only noticed the bed warping after Printing ABS.
I Mapped the bed Height, removed it from my 3D Printer and Adjusted it to a livable level.