This is my glass bed installation for my flashforge dreamer.
I needed :
- 1/4" thermal Glass from Flashforge 6"x9"x1/4"
- Some kapton tape 5mil self-adhesive (cut 4 pieces 1/2" x 6")
- Some blue paint tape
- 6.5mm flashforge shim for Z axis (Search thingverse site... thing:427689 )

See my pictures for the installation.

Everything must be very clean before installing the glass bed... use a little bit of aceton to clean.

It prints great with UHU glue stick. Easy to apply, easy to wash.

No binder clips needed... No danger for extruders or the 3D printer.
Hope this helps.
Michel
IMG_2057.jpgIMG_2058.jpgIMG_2055.jpgIMG_2053.jpgIMG_2056.jpg