Results 1 to 5 of 5
Thread: ABS Layer Quality and Adhesion
Hybrid View
-
09-19-2019, 12:18 PM #1
- Join Date
- Sep 2019
- Posts
- 5
-
09-20-2019, 01:51 PM #2
- Join Date
- Sep 2019
- Posts
- 5
I replaced the foil tape at the corners of the plate. Scrubbed the plate and releveled it. That seems to have done the trick.
New to 3d printing looking for...
Yesterday, 12:56 AM in Tips, Tricks and Tech Help