Results 1 to 10 of 15
Thread: Looking for PETG Tip
Hybrid View
-
09-05-2019, 06:16 PM #1
- Join Date
- May 2018
- Posts
- 561
If you can tell me the extrusion width you are using along with the layer height I can post you some stl file to check starting height and extrusion multiplier. Assuming you have a digital caliper to measure down to .0x mm.
-
09-05-2019, 06:39 PM #2
- Join Date
- Jan 2019
- Posts
- 24
This should help. I'm going to private msg you the STL file.
Untitled.jpg
Ender 3 Neo - Jam Problem
05-08-2024, 03:06 PM in Tips, Tricks and Tech Help